This is an automatic motion sensor, that is, it is activated when it detects movements in the pre-established coverage area; similar to the conventional sensor but specially designed and adjusted for the correct handling of LEDs.

The motion sensor is made up of an infrared barrier Rx-Tx (Emitter-Receiver) system. It is activated once the continuous exchange between the receiver and the emitter is broken, there is when the controller closes its internal circuit and allows the passage of current to feed the LED input that is connected to its output.

Highlights:

Multiple installations: the sensor/controller has a terminal block with 4 connectors inside. Two of them are input, where the cables of the Switching Source must be connected, respecting the polarity. The other two connectors are for the output, they also have the defined polarity, a positive (+) and a negative (-). This is where the appropriate LED input should be connected. The maximum output load is 8A.

Wide sensing range: The controller is a standard size, making it easy to flush mount. The sensor remains active for 10 seconds; If during that time it detects a movement again, it will stay on for 10 more seconds.
Multiple applications: this sensor/controller is used for lighting places where there are security cameras (CCTV), such as bathrooms, galleries, and corridors, among others.
Technical Data: this sensor/controller can be connected to both 12VDC and 24VDC. It has an 8A output, that is, 96W of maximum power at 12VDC.

Note: You can use LED strips at the output of this sensor/controller, due to its high lighting power and low power consumption.