Our Warm White LED Strip (SMD 2835) offers high brightness and is perfect for decorating any space both at home and in shops, given that it has a gel coating that allows the strip to be sealed and they have waterproof resistance. It is perfect for architectural illumination as it provides high-performance homogeneous light, ideal for highlighting architectural perimeters and outlines. They work both indoors and outdoors with IP68 water resistance.

LED strips have a wide variety of uses; the design makes it perfect for decorating any area and place like bars, homes, cars, gardens, etc. They can be regulated by remote controllers or dimmers and have a recessed installment using recessed aluminum profiles in order to achieve the amount of brightness desired and specific for each moment.

This LED Strip has 60 LEDs per meter and 6,000 lumens per roll; we also have installment accessories available such as connectors, extension cables, controllers, power supplies, aluminum profiles, and more ready for assembly.

Highlights:

 Super bright (high intensity): High-Quality Warm White, Double Density 300 LEDs (type SMD 2835), high intensity and reliability; this LED Strip Light provides illumination while maintaining cost-effectiveness through low power consumption.

 Adhesive backing: Featuring a Peel-And-Stick self-adhesive tape, it is possible to install your LED strip to most surfaces.

 Waterproof & Reliability: Silicone sealed LED strip allows you to install the light strip in most locations. The flexibility of the strip makes it easy to install on any clean, dry, and smooth surface.

 Cuttable: The light strip is manufactured to be cut to any desired length up to 16.4ft / 5m without losing functionality. It can be cut into segments of 3 LEDs (1.97in / 5cm) at the marked sections and assembled by simple soldering or you can use our connectors for easy installation.

 Where to use it?: With its 120-degree wide-angle illumination, smooth and even light spread, it is ideal for home and business lighting decoration providing a linear or perimeter effect. It provides high brightness, with low power consumption and with a 50,000+ hour’s long lifespan. This LED Strip is ideal to use for lighting bars, stained glass windows, bowings, parks, gardens, signs, pools, and more!

Note:

■ This product must ONLY be used with a DC 12V power supply.

■ The voltage or supply voltage of the source must be equal to the supply voltage of the LED strip. If it is lower, the intensity of the LED strip will be lower than it should and if it is higher, you can get to burn the LED strip.

■ Remember that depending on the number of strips you need to install, and in case you need the installation of a dimmer or controller, it will determine the type of power supply required, and additionally, the use of amplifiers will be necessary.

■ The amperage or power current can be equal to or higher than the power current of the LED strip. If it is lower, the LED strip will not give the corresponding light and could damage the power supply. If it is higher, nothing will happen because the LED strip will take whatever it needs.

■ If you want to use dimmers to regulate the light intensity or controllers to choose the color tone, it is necessary the use of amplifiers. Please contact us to provide the best possible assistance for your project.
 

Precaution:

■ DO NOT expose this Strip to sunlight because of UV damages.

■ DO NOT bend this LED Strip on a ratio under 1.97in / 5cm.

■ DO NOT bend it in a horizontal plane. 

■ All of the above can damage the LED Strip and NULLIFY THE GUARANTEE.