SMD6060 S-Shape LED Strip 12V 10W/m Warm 850lm/m 20LEDs/m, 16.4ft

    Unit price

    • $24.70
    • $ 49.40
    • 50% OFF
* Prices do not include TAX. ** All prices updated to 06/17/24.
Power Comsuption 50 W
Power Comsuption per Meter 10 W/m
Input Voltage 12 Vdc
Luminous Flux 4250 lm
Luminous Flux per meter 850 lm/m
Luminous Efficacy 85 lm/W
Color Warm White   
CCT 3000-3500 ºK
CRI >80 Ra
Beam Angle 160 °
LED Type SMD6060   
Number of LEDs 100 LEDs
LEDs per meter 20 LEDs
Dimmable? Yes   
IP Protection Grade IP33   
Use Indoor   
Flexible? Yes   
Operating Temperature -13 ~ 140 °F
Storage Temperature -13 ~ 158 °F
Lifespan 30000 h
Length 16,41 ft
Width 0,39 in
Height 0,04 in
Weight 2,82 oz

Our S-Shape LED strip gives you even more possibilities of use! Now you can install these kinds of strips on corners or on more curved surfaces without having to necessarily cut and connect in comparison with other kinds of strips.

Designed for professionals and lighting amateurs, these LED strips are very easy to use and install. Our SMD 6060 warm white LED strip offers high brightness and is perfect for decorating any space both at home and in shops, it is perfect for indoor illumination as it provides high-performance homogeneous light, ideal for highlighting ceilings perimeters and outlines.

LED strips have a wide variety of uses; the design makes it perfect for decorating any area and place like stands, displays, bars, homes, under cabinet lighting, halls, ceilings, headboards, indoor railings, etc. They can be regulated by remote controllers or dimmers and have a recessed installment using recessed aluminum profiles in order to achieve the amount of brightness desired and specific for each moment.

This LED strip has 20 LEDs per meter and 4,250 lumens per roll; we also have installment accessories available such as connectors, extension cables, controllers, power supplies, aluminum profiles, and more; ready for assembly.



enlightened SMD6060: 6060 is the newest type of chip being used. 6060 refers to the measurement of the chip, meaning that it measures 6.0mm by 6.0mm (0.24x0.24in). This new type of LED chip provides even greater brightness and uniform lighting than SMD5050.

enlightened High-intensity lighting: it’s a high-quality warm white strip with a double density of 100 LEDs (per roll of 16.40ft | 5m) and reliability; this LED strip light provides illumination while maintaining cost-effectiveness through low power consumption.

enlightened Adhesive backing & flexibility: featuring a peel-and-stick self-adhesive tape and the flexibility of the strip allows you to install your LED strip on any given smooth and clean surface.

enlightened Cuttable: the light strip is manufactured to be cut to any desired length up to 16.4ft | 5m without losing functionality. It can be cut into segments of 1 LED (1.97in | 5cm) at the marked sections and assembled by simple soldering or you can use our connectors for easy installation.

enlightened Where to use it? With its 160-degree wide-angle illumination, smooth and even light spread, it is ideal for home and business lighting decoration providing a linear or perimeter effect. It provides high brightness, with low power consumption and with a 50,000+ hour’s long lifespan.



This product must ONLY be used with a DC 12V power supply.

The voltage or supply voltage of the source must be equal to the supply voltage of the LED strip. If it is lower, the intensity of the LED strip will be lower than it should and if it is higher, you can get to burn the LED strip.

Remember that depending on the number of strips you need to install, and in case you need the installation of a dimmer or controller, it will determine the type of power supply required, and additionally, the use of amplifiers will be necessary.

The amperage or power current can be equal to or higher than the power current of the LED strip. If it is lower, the LED strip will not give the corresponding light and could damage the power supply. If it is higher, nothing will happen because the LED strip will take whatever it needs.

If you want to use dimmers to regulate the light intensity or controllers to choose the color tone, it is necessary the use of amplifiers. Please contact us to provide the best possible assistance for your project.



DO NOT expose this strip to sunlight because of UV damages.

DO NOT bend this LED strip on a ratio under 1.97in | 5cm.

DO NOT bend it in a horizontal plane.

All of the above can damage the LED strip and NULLIFY THE GUARANTEE.

* Prices do not include TAX. ** All prices updated to 06/17/24.
Contactanos por Whatsapp

Contact us

from 9 a.m. to 6 p.m.