Featured Products

SMD 3528 FLEXIBLE LED STRIP - 300LEDs/16.4ft - Cold White - UL
The Non-Waterproof SMD 3528 LED Flexible Strip comes in a roll of 16.4ft (5mt).   It can be cut into 3-LED segments (50mm / 1.97") on the marked sections and rejoined by a simple solder or you can use our connectors which ar...
The Non-Waterproof SMD 3528 LED Flexible Strip comes in a roll of 16.4ft (5mt).
 
It can be cut into 3-LED segments (50mm / 1.97") on the marked sections and rejoined by a simple solder or you can use our connectors which are solder-less for easy installation.
 
Designed for both the lighting professional and amateur, these LED Strips are very easy to install and use 3M Tape backing for easy mounting. Just peel and stick to any clean flat surface.
 
How to buy??: The listed price is for 5mts/16.4ft. If you select a quantity of "1", you will get 5mts/16.4ft of LED Strip. We have different prices depending on the quantity you need. THE MORE YOU BUY THE MORE YOU SAVE!!!
 
Technical Data:
Working Voltage - Input : DC12V
Working Current - Output
per 1mt/3.28ft.: 400mA (4.8W)
per 5mt/16.40ft: 2A (24W)
 
LED Type:   SMD 3528
Strip Width:  8mm / 0.32"
LED #:  60LED/3.28ft
 300LED/roll (5mt / 16.40ft.)
 
Protection Rating: IP20 (Non-Waterproof) - For indoor use only (in dry locations)
Fully Dimmable
LED Lifetime:   40,000h
 
Optical Characteristics (per roll):
Wavelength:6500°K
Lumen: 1950Lm
Beam Pattern:  120°
CRI: 75
 
Notes:
1- This product must only be powered by a DC12V Power Source. For 5mts/16.4ft. we recommend our "DC12V * 3A 36W Switching Power Supply - UL LISTED"
2- Unplug your power source when cutting LED strips.
3- Pay close attention to the polarity of all connections: match positive to + and Negative to -.
4- Pay attention to the Ingress Protection.
5- If you cannot wire this product on your own, please contact us or contact a professional.
6- You must cut the strip with scissors on the section marked with two points of tin, preferred in the middle of these points, so that each strip will have tin
for other connections.
7- Place the LED Strip with the adhesive backing and for permanent placing use a glue of your preference
8- Caution: Do not bend this LED Strips to a radius less than 15mm or bend it on horizontal plane, because it can cause damage to the strip and void the warranty.
9- We recommend connect up to 10mts./32.80ft. (2 rolls) of these strips at the same Power Supply for better use. For longer runs, another Power Supply and Amplifier are required.
10- Please confirm color, voltage, wattage and length before ordering.
12- 2-YEAR WARRANTY
 
To Use it, Don’t forget to buy the following:
 
Required:
DC12V Power Supply: It depends on the quantity or length of the LED Light you will setup. For best use, it should be about 20% stronger (Watts/Amps) than the total required to run your system. How?.  For 5mts/16.4ft. we recommend our "DC12V * 3A 36W Switching Power Supply - UL LISTED"
 
Amplifier: for connecting more than 2 rolls of this LED Strips and maintain the light output quality.
 
Optional
Indoor LED Strip Connector: for connecting multiple LED light Strips at any angle.
Bipolar Power Cable: for making connections
Dimmer: our LED Light Strips are 100% dimmable. Our Dimmers allow you to infinitely adjust your Strip´s brightness.
 
 
All specifications are subject to change without notice
 
12VDC @ 200mA / 50cm de tira SMD
 
12VDC @ 400mA / 1m de tira SMD
 
12VDC @ 2000mA / 5m de tira SMD
- See more at: http://www.dled.com.ar/tira-smd3528-interior-azul-x-1m-ip-20#sthash.jAVnjSZy.dpuf
12VDC @ 200mA / 50cm de tira SMD
 
12VDC @ 400mA / 1m de tira SMD
 
12VDC @ 2000mA / 5m de tira SMD
- See more at: http://www.dled.com.ar/tira-smd3528-interior-azul-x-1m-ip-20#sthash.jAVnjSZy.dpufFor indoor applicationsOur Advice:   You must cut the strip in the locations indicated with two points of tin. For the best use of the strip, you need cut it in the middle of those points, in that way the two strips will have tin for others connections.
Al cortar la tira, recordá dejar un par de pads positivo / negativo de cada lado del corte para poder utilizar ambas partes de la tira. - See more at: http://www.dled.com.ar/tira-smd3528-interior-azul-x-1m-ip-20#sthash.jAVnjSZy.dpufAll specifications are subject to change without notice
From
$
To $
Qty.
50W LED Flood light with Knuckle - UL - Landscaping Light
Our new line of 120-volt LED Flood Lights with adjustable knuckle are made from die-cast aluminum with stainless steel screws, each with an integrated LED with a very wide (120º) beam angle. It has a fully-adjustable locking knuckle ...

Our new line of 120-volt LED Flood Lights with adjustable knuckle are made from die-cast aluminum with stainless steel screws, each with an integrated LED with a very wide (120º) beam angle. It has a fully-adjustable locking knuckle so you can set it to the desired angle and the tempered glass lens is fully casketed to seal it against moisture. Multiple mounting options add versatility for the fixtures make them the perfect choice any higher-power application, and are a good alternative to HID flood lights

 
UL and cUL Listed
Material: Die-cast aluminum housing with stainless steel screws
Lens: Tempered glass
Finish: Black
Light Source: Integrated LED
LED:
Suitable for Wet Locations, ambient temp. -20 to +40°C
Lead Wire: 5" of premium grade UL Listed lead wire. (Power plug not included).
Mounting: Knuckle Mount
Installation method: Suitable for ground mounting, uplighting & downlighting
 
Uses: Ideal for general site lighting, alleys, loading docks, parks, doorways, parking areas, accent or tree lighting. Works great with motion sensors or other on/off controls.

Notes:

·         When installing this LED Flood Light, make sure to turn off the circuit breaker to avoid electrocution.
·         Do not look directly into the light. This can cause damage to your eyes.
·         Shipped Safe in heavy duty large box with foam

 
All specifications are subject to change without notice
 
From
$
Qty.
10W LED Flood Light with Knuckle - Cool White - Landscaping Light
Our new line of 120-volt LED Flood Lights with adjustable knuckle are made from die-cast aluminum with stainless steel screws, each with an integrated LED with a very wide (120º) beam angle. It has a fully-adjustable locking knuckle ...

Our new line of 120-volt LED Flood Lights with adjustable knuckle are made from die-cast aluminum with stainless steel screws, each with an integrated LED with a very wide (120º) beam angle. It has a fully-adjustable locking knuckle so you can set it to the desired angle and the tempered glass lens is fully casketed to seal it against moisture. Multiple mounting options add versatility for the fixtures make them the perfect choice any higher-power application, and are a good alternative to HID flood lights. 

UL and cUL Listed 
Material: Die-cast aluminum housing with stainless steel screws
Lens: Tempered glass
Finish: Black
Light Source: Integrated LED
LED: Cree® LED Lighting Products
Lead Wire: 5" of premium grade UL Listed lead wire. (Power plug not included).
Mounting: Knuckle Mount
Installation method: Suitable for ground mounting, uplighting & downlighting
 

Uses: Ideal for general site lighting, alleys, loading docks, parks, doorways, parking areas, accent or tree lighting.

Works great with motion sensors or other on/off controls.

Notes:

·         When installing this LED Flood Light, make sure to turn off the circuit breaker to avoid electrocution.
·         Do not look directly into the light. This can cause damage to your eyes.
·         Shipped Safe in heavy duty large box with foam

 
All specifications are subject to change without notice
 
From
$
Qty.
ALUMINUM PROFILE (for LED Strip) - MILKY COVER - 7mm / 0,27in DEEP - 2m / 78,74in LENGTH
The aluminum profiles are ideal for protecting the LED strips from dust and humidity. They are suitable for rigid and flexible strips which are installed inside. You can use them in stairways, shelves, bathrooms, kitchens, bedrooms, among...

The aluminum profiles are ideal for protecting the LED strips from dust and humidity. They are suitable for rigid and flexible strips which are installed inside.

You can use them in stairways, shelves, bathrooms, kitchens, bedrooms, among others.

Taps and accessories for suspended installation included.

 

From
$
To $
Qty.
SMD 5050 LED Strip Warm White 3000°K 60 LEDs/m DC12V 12W/m IP33 x 16.4 ft / 5 m - UL
UL - LISTED CERTIFIED   The Flexible SMD 5050 LED Strip comes in a roll of 5 m (16.4 ft.) and is RGB/ Multicolored.  It can be cut into segments of 3-LEDs (50mm / 1.97") at the marked sections and assem...
UL - LISTED CERTIFIED
 
The Flexible SMD 5050 LED Strip comes in a roll of 5 m (16.4 ft.) and is RGB/ Multicolored.  It can be cut into segments of 3-LEDs (50mm / 1.97") at the marked sections and assembled by a simple solder or you can use our connectors for easy installation.
 
The installation process for these LED Strips is very easy for anyone to adhere to any clean flat surface with their peel-and-stick backing.
 
Take a look at our LED Strip KITS! They include everything you need to connect and control your LED Strips with professional results.
 
From
$
To $
Qty.
ALUMINUM PROFILE (FOR LED STRIP) - MILKY COVER - 14,5mm / 0,59in DEEP - 2m / 78,74in LENGTH
This aluminum profile is 2 meters long and has a white plastic cover. Comes with clips and covers included for installation. They are suitable for rigid and flexible tapes. Ideal for staircases, showcases, shelves, base cabinets and beds, bath...
This aluminum profile is 2 meters long and has a white plastic cover. Comes with clips and covers included for installation. They are suitable for rigid and flexible tapes. Ideal for staircases, showcases, shelves, base cabinets and beds, bathrooms, kitchens and bedrooms.

 

From
$
To $
Qty.
ALUMINUM PROFILE (for LED Strips) - MILKY COVER - ROUND SHAPED FOR CORNERS - 2m / 78,74in LENGTH
This aluminum profile is 2 meters long and has a white plastic cover. Comes with clips and covers included for installation. Round shape perfect for corner and small joints  They are suitable for rigid and flexible tapes. Ideal for stairc...
This aluminum profile is 2 meters long and has a white plastic cover. Comes with clips and covers included for installation. Round shape perfect for corner and small joints  They are suitable for rigid and flexible tapes. Ideal for staircases, showcases, shelves, base cabinets and beds, bathrooms, kitchens and bedrooms.

 

From
$
To $
Qty.
DC12V 1.5A Mini Infrared Motion Sensor for LED Strips
This mini controller for LED Strips has a motion sensor that allows you to turn on and off the strip by proximity. Its range of coverage is approximately 8cm. Its size facilitates installation in aluminum profiles. It also has a switch that a...
This mini controller for LED Strips has a motion sensor that allows you to turn on and off the strip by proximity. Its range of coverage is approximately 8cm. Its size facilitates installation in aluminum profiles. It also has a switch that allows you to leave the strip on and for proximity to turn off.
 
Ideal to combine with our LED strips and our aluminum profiles
From
$
To $
Qty.
DC5-24V 2A Mini Touch Sensor 3 Levels dimming
This Mini Controller for LED Strips is tactile and allows to regulate the light intensity in 3 levels. Its size allows easy installation inside aluminum profiles.   Ideal controller to combine with our LED Strips and our Aluminum...
This Mini Controller for LED Strips is tactile and allows to regulate the light intensity in 3 levels. Its size allows easy installation inside aluminum profiles.
 
Ideal controller to combine with our LED Strips and our Aluminum Profiles.
From
$
To $
Qty.